Palatine has a busy downtown, a large industrial park and a significant amount of multi-unit housing. Alongside ordinary retail and office door work, that creates demand for common entrance doors, vestibules and corridor doors in residential buildings, where one failed closer affects every resident.
A common entrance in a multi-unit building is one of the hardest-working doors on any property. Every resident, every visitor, every delivery and every piece of furniture passes through it, and there is no single person whose job it is to notice when it stops working.
That is why common entrances tend to fail further than they should before anyone acts. By the time a door is reported, it is usually not one fault but three: a worn closer, a loosened frame and a latch that no longer reaches its strike.
Common entrances, vestibules and corridor doors
The entrance set on a residential building usually comprises an outer door, an inner door and a corridor or lobby door beyond them. Each one adds load to the next, so a fault at the outer door often shows up as a fault at the inner one.
The practical approach is to service them as a set: check alignment and anchoring on all of them, set the closers appropriately for their weight, and confirm that every door latches without assistance. A vestibule where both doors no longer latch is a building security problem, not an inconvenience.
- Common entrance, vestibule and lobby door repair.
- Closer replacement and adjustment on doors used by every resident.
- Frame anchoring and alignment where a heavily used door has dropped.
- Latching and locking hardware repair so the building secures.
Downtown storefronts and offices
The commercial core has conventional storefront and office entrances in aluminum framing with glass leaves. They are repaired rather than replaced in most cases, and the work is concentrated on pivots, closers, thresholds and latching hardware.
Where a storefront frame has been damaged by a vehicle or a delivery, a frame section can often be replaced without renewing the whole frontage, which keeps a unit trading while the work is done.
Industrial park and warehouse door systems
The industrial park generates the standard industrial door work: steel service doors, personnel doors between areas, and rated doors at stairwells and plant rooms. The distinguishing feature of these buildings is the volume of openings rather than any unusual type.
Impact damage is the recurring theme. Service doors are struck by equipment, frames are pushed out of line, and the repair only lasts if the frame is corrected rather than the leaf alone.
Rated doors in mixed buildings
Multi-unit and mixed-use buildings carry a large number of rated doors, particularly at stair enclosures, corridors and parking separations. Each is only rated when its complete hardware set is present and working, and a disconnected closer or a missing latch takes the assembly out of service.
Building and fire codes are adopted and amended by each state and enforced locally, so the requirement for a specific opening comes from the authority having jurisdiction for that address. [Insert source: adopted code editions and local amendments for Palatine and Cook County]
Hours and emergency call-out
Office hours are Monday to Friday 08:00 to 17:00 and Saturday 09:00 to 17:00, with Sunday closed. Emergency call-out is a separate service and runs 24 hours a day, including Sundays and holidays, for a door that has failed, been forced or will not secure.
Call (224) 833-4828 or (262) 277-9190, or email info@accuratecommercialdoors.com. A common entrance that will not lock is treated as an emergency, because the whole building is affected.